


FEATURES
Standard dimension
Thickness tolerance
Flatness tolerance
Standard grid
Standard slit width
Operating conditions
Protective coating
6000 x 2500 mm
EN10029 Class B
EN10029 Class N steel type H
19 slits in length, 7 slits in width of plate
2.4 mm over full depth of Top wear Layer
-46 °C min, 200 °C max
UV shop primer 75 µ optional
IN STOCK 6000 x 2500 mm plate
Thickness (mm)
12
14
18
20
25
30
Weight (kg)
1412
1647
2118
2354
2942
3530
50%-50%
6h+6 mm
7h+7 mm
9h+9 mm
10h+10 mm
12,5h+12,5 mm
15h+15 mm
60%-40%
7h+5 mm
12h+8 mm
15h+10 mm
67%-33%
9h+5 mm
12h+6 mm
13h+7 mm




Deltastraat 23 | 4301 RC Zierikzee | The Netherlands | +31 (0)111-41 42 12 | info@gcclad.com
WERKEN BIJ
HECHT TEAM - ERKEND OPLEIDER - VRIJDAGMIDDAG VRIJ - GOED SALARIS
GC Clad is een internationale organisatie en levert buizen, vormstukken én plaatmateriaal aan klanten over de hele wereld. Deze klanten bevinden zich voornamelijk in de baggerindustrie en de mijnbouw. Wij staan bekend om het leveren van échte kwaliteit. Ons materiaal heet Fedur en is ontzettend slijtbestendig. Het voldoet aan de hoogste milieueisen, heeft een lange levensduur en is 100 procent recyclebaar. Daarom zijn wij uniek. Alles vindt plaats in eigen huis: van advies tot eindproduct. Zo kunnen wij samen met onze jarenlange ervaring en technologische kennis een optimale kwaliteit garanderen.
Wij zijn een familiebedrijf. Met zo’n 50 betrokken medewerkers werken wij vanuit onze eigen fabriek in Zierikzee. Onze werknemers doen het werk met trots en passie, zowel op kantoor als in de productiehallen. Wij bieden een veilige en gezonde werkomgeving waar jij zelfstandig je functie kunt uitvoeren. We zijn momenteel hard aan het groeien. Daarom hebben wij vele leuke vacatures én bieden we een goed salaris. Groei jij met ons mee bij de leukste werkgever van Zeeland?
OUR PRODUCTS









Deltastraat 23 | 4301 RC Zierikzee | The Netherlands | +31 (0)111-41 42 12 | info@gcclad.com

TECHNICAL INFO

TOP LAYER
Hardness ≥ 62 HRc
Consistant hardness
High wear resistant
Fine grain microstructure
Patented grid
Smooth surface
BASE LAYER
Hardness < 200 HB
Excellent weldability
S23512/ASME SA516 gr.60
Ductile and tough
Works as absorber
Tensile strengt min. 415 MPa
Charpy V 260Joule/-46 ˚C
Elongation min.28%
ABOUT GC CLAD
Using Fedur reduces the need for replacing parts, means less maintenance and reduces costs.
At our factory in The Netherlands we manufacture, develop and engineer high-grade wear resistant Fedur components for mining and dredging industry. We have a great machine park for cutting, rolling, pressing, bending and welding bimetal. Based on our extensive knowledge and experience, we can advise you on how to use Fedur wear resistant technological solutions for both new and existing situations.
Based on our extensive knowledge and experience, we can advise you on how to use Fedur wear resistant technological solutions for both new and existing situations.
On site visit: To provide tailored advice, we will gladly visit your location to see if our theory matches your practice.
Proposal: After assessing your demand, we will make a draft drawing that includes the form, costs and feasibility.
Engineering: Once the main dimensions have been drawn, each item will be optimised for strength and price/quality ratio. This is calculated via a Finite Element Method (FEM) and by calculating the Fedur wall thickness/layer thickness ratios. The end result consists of a detailed item drawing, together with a 3D model, if desired.
CONTACT
Head Office
Inquiries
GC Clad Parts BV
Deltastraat 23
4301 RC Zierikzee
The Netherlands
Tel: +31 111 414 212
Vacatures
Vanwege onze continue groei hebben wij mooie werkplekken beschikbaar. Stuur je cv naar info@gcclad.com.
For any inquiries, questions or commendations, please call: +31 111 414 212 or fill out the following form